Black stripping pads for floor machines

Black low-speed stripping pads for floor machines 150-350 RPM by iNO Gloss Pads

The black iNO Gloss stripping floor pads are used with water based floor stripping solution to remove worn and soiled floor finishes or sealers. These floor pads can also be used to clean heavily soiled hard surface floors, such as concrete, when used with proper cleaning solutions. The black stripping pads are better used with floor machines or automatic scrubbers at speeds of 350 RPM maximum.

Directions for use

1. Clean the floor with a dust mop or sweeper before use.
2. Use the pad with a stripping solution until the old finish or seallant is removed.
3. Remove the cleaning solution with a mop, wet vacuum or autoscrubber.
4. Rinse the floor with water and let completely dry before applying new finish or opening to public
5. Clean the floor pad using a water spray nozzle to increase the its utility life. To dissolve heavy soil or finish this pad may be soaked in detergent or diluted stripping solution prior to washing.
6. Allow the stripping floor pad to dry before it's next use

Specifications